Sort
Sort
Filter
- All products
- Pull off
- Cutting & loosening
- Pressing & Inserting
- Grip & Hold
- Screws & drive
- Signing & labelling
- Testing & measuring
- Storage & Presentation
- Hammering
- Care and safety
- Optional extensions
-
Spare parts
- Spare parts for 844/845
- Adapter
- Support foot / ring
- Pull-out trays
- Drill guide
- Drill
- Turntable
- Pressure plate
- Thrust pieces
- Insert plate
- Insert socket
- Spare knife
- Replacement tips
- Spare parts for K-222
- Replacement latches for L-Boxx
- Fork
- Threaded bush
- Thread adapter, /inserts, connecting nut
- Sliding bracket
- Slide hammer
- Hook
- Hammer handle
- Lever
- Spare parts for test pumps
- Claw
- Body
- Bearing adapter
- Nuts
- Metal case
- Profile pin
- Powernut
- Ring set
- Selecthor head holder half
- Selecthor function insert
- Side bolt / draw bolt
- Brass knuckles
- Impact sleeve
- Key
- Blasting chisel
- Spindle tip
- Clamping ring
- Clamping clamp
-
Spindle
- Spindle with handle/toggle
- Spindle insert & hydr.
- Pin
- Punching knife / punching die holder
- Protective caps
- Screws
- Vice jaws
- Dividing disc + hydraulic press
- Thread repair spare parts
- Traverse
- Wear part
- Various
- Factory repair
- Tension bolt
- Spare parts for 8-HP
- Hydraulic spare parts
- Spindle
-
Series 16-22-V
Spindle
The spindle extension is a spare part for the cylinder liner extractor set from the K-16 series. The extension makes it easier to adapt to different…
-
Series 44-206
Spindle
The crosshead inner bushes with spindle are spare parts for 2-arm universal pullers with self-centring puller hooks from series 44. The collar on the…
-
Series 55-06
Spindle
The spindle with plaster is a spare part for single-edged, mechanical nut splitters from the 55 series.
-
Series 482-206
Spindle
The mechanical pressure spindles with bushing and spring are spare parts for 2- and 3-arm universal pullers with auto-snap of the 482 and 483 series.…
-
Series 17-06
Spindle
The pressure spindles are spare parts for separating devices with quick-clamping pressure spindles of series 17. The separating jaws can be clamped…
-
Series 21-6
Spindle
The spreading spindles are spare parts for the large internal extractors 21-89 and 21-90. The spindle is used to spread the spreading jaws during…
-
Series 204-V-06
Spindle
The mechanical pressure spindle with adapter is a spare part for 2-arm puller for bearing inner rings "Cobra" with lateral clamping clamp. The adapter…
-
Series 43-206
Spindle
The mechanical pressure spindles are spare parts for handy small parts pullers from the 43 series. The thin spindle tip enables the removal of…
-
Series 600000
Spindle
The mechanical pressure spindles are spare parts for KUKKO pullers and, thanks to their special coating, guarantee particularly good sliding…
-
Series 11-206
Spindle
The traverse inner bushes with spindle are spare parts for extra strong, 3-arm pullers from the 11 series. The collar on the spindle head prevents the…
-
Series 022-006
Spindle
The spindles are spare parts for series 22 counter stays and are used to mount internal extractors on the support.
-
Series 12-206
Spindle
The traverse inner bushes with spindle are spare parts for 3-arm pullers "Alligator" with pre-adjustable puller hooks of series 12. The collar of the…
-
Series 129-06
Spindle
Spare parts for ball joint extractors replace components of ball joint extractors with and without hydraulics from the 129-3, 129-3-H, 129-5 and…
-
Series 101-101
Spindle
The spindles with hexagon nut and washer are spare parts for Hand vices of the 101 series. The wing nut is robust and resistant.
-
Series 103-000
Spindle
The spindles with nut are spare parts for manual clamping clamps with spanner from the 103 series. The very robust spindles are locked in place with…
-
Series 16-21-6
Spindle
The spreading spindle is a spare part for the large internal extractor of the 16-21 series. The spindle is available either with or without additional…
-
Series 109-181
Spindle
The spindles with wing nut and washer are spare parts for Series 109 machine clamps.
-
Series 113-206
Spindle
The spindle and bushing is a spare part for 2- and 3-arm pullers for rolling bearings (Swedish model) of series 112 and 113.
-
Series 106-201
Spindle
The spindles with nut are spare parts for manual clamping clamps from the 106, 107 and 109 series. The extra robust spindles are ideal for the extra…
-
Series 128-SW06
Spindle
The pressure spindle is a spare part for universal wiper arm pullers from the 128-F-SW series.
-
Series 165-E-01
Spindle
The spindle is a spare part for universal spreaders from the 165-E series.