Menu Button

Series 129-3-4

Down Arrow
Ball joint ejector with lever transmission, for medium and heavy trucks, buses and construction vehicles

Description

The Series 129 ball joint extractor with lever transmission is used to press out ball studs when removing ball joints and track rod knobs on track rods for medium and heavy trucks, buses and construction vehicles. Thanks to its lever transmission, the ball joint extractor can also apply a lot of force where there is hardly any access space. The 129 series impresses with its wide range of applications. Different versions enable optimum application in every situation.

Area of application

  • For pressing out ball studs when removing ball joints and track rod knobs on track rods, for medium and heavy lorries, buses and construction vehicles.

Products
Down Arrow
Benefits Operation

  • Better feel thanks to modern and ergonomic design

  • Low force required for high extraction performance

  • The clamping depth can be easily adjusted using a spring mechanism

  • The bolt can be adjusted to flexibly adapt the clamping range

  • Fasten the ejector between the ball joint and the part
  • Tighten the spindle with a torque spanner
  • Threaded pin of the ball joint is pressed out of the component

Products of this series

Fork opening (jaw opening) [mm]
mm

Lever clamping range [mm]
mm

Max. torque [Nm]
Nm
 Max. tensile force

Max. tensile force [kN]
kN
 Max. tractive force

Max. tractive force [t]
t

Width across flats [mm]
mm

Net weight [kg]
kg
 Global sales capability given

Global sales capability given
129-3 31 mm 70 mm 85 Nm 100 kN 10 t 19 mm 3,316 kg Yes
129-4 40 mm 85 mm 125 Nm 150 kN 15 t 19 mm 3,26 kg Yes
×