Menu Button
The separating device 15-0 for pulling off ball bearings, roller bearings, inner rings and other parts that lie flat

Series 15

Down Arrow
Separating devices

Description

The Series 15 separators are used together with the Series 18 pullers for removing ball bearings, roller bearings, inner rings and other flat parts in trade, industry and workshops when there is not enough space for pulling hooks. The separating and extracting process is able to gently separate these parts before they can be extracted from the outside.

Area of application

  • Together with the Series 18 pullers for pulling ball bearings, roller bearings, inner rings and other flat parts in trade, industry and workshops.

Sectors
Down Arrow
Products
Down Arrow
Benefits Operation

  • The sharp cutting edges enable stripping where other stripping methods cannot be used

  • The screw connection between the separating and extracting device ensures maximum stability during extraction

  • If the separating jaws are screwed into the extractor the other way round, the contact surface is enlarged and extracted more gently

  • Press the sharp cutting edges of the cutting device behind the part
  • Clamp the separating jaws onto the side bolts of the separating device using the pressure spindle by tightening the adjusting nuts evenly and ensuring that the separating blades are positioned under the part to be removed as far as they will go
  • Screw the pull bolt of the puller into the threaded holes of the separator as far as it will go
  • Hold the separator firmly and pull off the relevant part safely and carefully by tightening the clamping nut

Technical drawings

View1 View2 View3 View4
Front view
AttributAbbreviationAttributesID
Gesamtbreite X8278
Gesamthöhe Z8282
Schlüsselweite Betätigungssechskant S18287
Trenndurchmesser (min.) Cmin8581
Aufnahmegewinde für Zugbolzen T18587
Front view
AttributAbbreviationAttributesID
Trenndurchmesser (max.) Cmax8582
Schneidenhöhe gesamt H8585
Side view
AttributAbbreviationAttributesID
Gesamttiefe Y8280
Detail view 1
AttributAbbreviationAttributesID
Schneidenstärke an der Spitze K8583
Schneidentiefe nutzbar O8586
Schneidenstärke hinten L8584

Products of this series

Separation diameter (min. - max.) [mm]
mm

Mounting thread for tension bolt [nominal dimension]
nominal dimension

Total cutting edge height [mm]
mm

Cutting edge thickness at the tip [mm]
mm

Rear cutting edge thickness [mm]
mm

Usable snow depth [mm]
mm

Width across flats [mm]
mm

Net weight [kg]
kg

Suitable for (list)
Included in the set

Included in the set
Global sales capability given

Global sales capability given
15-0 8 mm - 60 mm M10 39,5 mm 0,3 mm 5,5 mm 21 mm 17 mm 0,695 kg 18-0 15-K Yes
15-00 6 mm - 46 mm M6 24,5 mm 0,2 mm 3,3 mm 12,5 mm 10 mm 0,23 kg 18-00 29-A-69 Yes
15-1 8 mm - 75 mm M10 43 mm 0,5 mm 6,4 mm 25 mm 19 mm 1,15 kg 18-1 15-A Yes
15-2 22 mm - 115 mm M14x1,5 67 mm 0,5 mm 9,1 mm 41 mm 24 mm 2,9 kg 18-2, 18-2-B 15-B, K-20-15 Yes
15-3 30 mm - 150 mm M18x1,5 78 mm 0,5 mm 11,2 mm 50 mm 32 mm 5,3 kg 18-3, 18-3-B 15-C Yes
15-4 30 mm - 200 mm G5/8 103 mm 2 mm 15,6 mm 65 mm 41 mm 11,8 kg 18-4, 18-4-B 15-D, 18-4SAF Yes
15-5 30 mm - 250 mm G3/4-14 116 mm 2 mm 14 mm 70 mm 46 mm 18,5 kg 18-5, 18-5-B 15-E Yes
×