Menu Button
The separating device 17-0 with quick-action clamping spindle for particularly handy removal of parts lying flat on the surface

Series 17

Down Arrow
Separating devices with quick-action clamping spindle

Description

The Series 17 separators are used together with the Series 18 pullers for removing ball bearings, roller bearings, inner rings and other flat parts in trade, industry and workshops when there is not enough space for pulling hooks. The separating and extracting process is able to gently separate these parts before they can be extracted from the outside. Compared to the 15 series, the 17 series is particularly easy to handle because the separating jaws are clamped quickly and centrally by a pressure spindle.

Area of application

  • For removing ball bearings, roller bearings, inner rings and other flat parts in trade, industry and workshops.

Sectors
Down Arrow
Products
Down Arrow
Benefits Operation

  • Simple and safe handling is made possible by the quick-release pressure spindle

  • The sharp cutting edges enable stripping where other stripping methods cannot be used

  • The screw connection between the separating and extracting device ensures maximum stability during extraction

  • If the separating jaws are screwed into the tightening device the other way round, the contact surface is enlarged and pulled off more gently

  • Press the sharp cutting edges of the cutting device behind the part
  • Tension the separator jaws by actuating the pressure spindle and ensure that the separator blades are positioned under the part to be removed as far as they will go
  • Screw the pull bolt of the puller into the threaded holes of the separator as far as it will go
  • Hold the separating device firmly and pull off the relevant part safely and carefully by tightening the clamping nut

Technical drawings

View1 View2 View3 View4
Front view
AttributAbbreviationAttributesID
Gesamtbreite X8278
Gesamthöhe Z8282
Schlüsselweite Betätigungssechskant S18287
Trenndurchmesser (min.) Cmin8581
Front view
AttributAbbreviationAttributesID
Trenndurchmesser (max.) Cmax8582
Schneidenhöhe gesamt H8585
Side view
AttributAbbreviationAttributesID
Gesamttiefe Y8280
Detail view 1
AttributAbbreviationAttributesID
Schneidenstärke an der Spitze K8583
Schneidentiefe nutzbar O8586

Products of this series

Separation diameter (min. - max.) [mm]
mm

Mounting thread for tension bolt [nominal dimension]
nominal dimension

Total cutting edge height [mm]
mm

Cutting edge thickness at the tip [mm]
mm

Rear cutting edge thickness [mm]
mm

Usable snow depth [mm]
mm

Width across flats [mm]
mm

Net weight [kg]
kg

Suitable for (list)
Global sales capability given

Global sales capability given
17-0 8 mm - 60 mm M10 39,5 mm 0,3 mm 5,5 mm 21 mm 17 mm 0,95 kg 18-0 Yes
17-1 8 mm - 75 mm M10 43 mm 0,5 mm 6,4 mm 25 mm 19 mm 1,465 kg 18-1 Yes
17-2 22 mm - 115 mm M14x1,5 67 mm 0,5 mm 9,1 mm 41 mm 24 mm 3,72 kg 18-2, 18-2-B Yes
17-3 30 mm - 150 mm M18x1,5 78 mm 0,5 mm 11,2 mm 50 mm 32 mm 7,135 kg 18-3, 18-3-B Yes
×