A 505/509 series deep-clamping tempered cast iron screw clamp with wooden handle for holding large workpieces
 Left Arrow
 Right Arrow

Series 505/509

 Down Arrow
Low-tension die-cast clamps

Description

The 505 to 509 series low-tension die-cast screw clamps with wooden handle are used for pressing together and holding large workpieces in construction and industry. The steel slide rail enables a high clamping force to be achieved. With their round wooden handle, the 505 to 509 series are classics in the screw clamp range.

Area of application

  • For pressing together and holding large workpieces in construction and industry.

  • Clamping force up to 7,000 N

  • Smooth-running trapezoidal spindles ensure even greater power transmission

  • No burr-related risk of injury due to concealed handle fastening in the wooden handle

  • Numerous variants of the clamping width and throat depth of screw clamps enable parts of different sizes to be held in place

  • Place the fixed clamping arm on the workpiece to be held and roughly fix it by moving the movable clamping arm
  • Tighten the threaded spindle by actuating the handle and thus firmly fix the workpiece

Products of this series

Total length [mm]

mm

Clamping width / Clamp projection [mm]

mm

Cross section of the slide rail [mm]

mm

Net weight [kg]

kg
Global sales capability given

Global sales capability given

505-040 530 mm 400 mm / 200 mm 35 x 11 3,256 kg Yes
505-060 730 mm 600 mm / 200 mm 35 x 11 3,855 kg Yes
505-080 930 mm 800 mm / 200 mm 35 x 11 4,35 kg Yes
505-100 1.130 mm 1.000 mm / 200 mm 35 x 11 4,86 kg Yes
506-040 570 mm 400 mm / 250 mm 45 x 12 5 kg Yes
506-060 770 mm 600 mm / 250 mm 45 x 12 7,4 kg Yes
506-080 970 mm 800 mm / 250 mm 45 x 12 4,2 kg Yes
506-100 1.170 mm 1.000 mm / 250 mm 45 x 12 6,5 kg Yes
507-040 570 mm 400 mm / 300 mm 45 x 12 7 kg Yes
507-060 770 mm 600 mm / 300 mm 45 x 12 7,94 kg Yes
507-080 970 mm 800 mm / 300 mm 45 x 12 8,5 kg Yes
507-100 1.170 mm 1.000 mm / 300 mm 45 x 12 9,57 kg Yes
×