Menu Button
The extraction/retrieval tool kit 890-EVO1 for suspension joints EVOBUS for assembly and disassembly on ZF axles
Left Arrow
Right Arrow

Series 890

Down Arrow
Pressing and removal tools for assembly and disassembly

Description

The EVOBUS suspension joint removal/installation tool set is used for mounting and removing the wishbone on ZF axles. The tools can be used on the RL 75 E axles, which are used as the front axle on all high-floor buses (buses with luggage compartment, coaches from Euro II and combi buses from Euro IV) from Setra and Mercedes-Benz. Also on the RL 75 EC axles, which are used as front axles on low-floor buses (Citaro, Setra low-floor series 400 and S 415 NF) and as additional axles in coaches and combi buses.

Area of application

  • For mounting and removing the control arm on ZF axles.

Products
Down Arrow
Benefits Operation

  • The smooth-running spindle with trapezoidal thread enables precise power transmission

  • Special tool for optimum application on ZF axles

  • Fasten the ejector between the ball joint and the part
  • Tighten the spindle with a torque spanner
  • Threaded pin of the ball joint is pressed out of the component

Products of this series

Insert depth [mm]
mm

For bushes with diameter (set) [mm]
mm

Width across flats [mm]
mm

Max. torque [Nm]
Nm
 Max. Pressing force

Max. Pressing force [kN]
kN
 Max. Press force

Max. Press force [t]
t

Net weight [kg]
kg
 Global sales capability given

Global sales capability given
890-EVO1 320 mm 58 - 79 36 mm 400 Nm 120 12 12,69 kg Yes
×