Sort
Sort
Filter
- All products
- Pull off
- Cutting & loosening
- Pressing & Inserting
- Grip & Hold
- Screws & drive
- Signing & labelling
- Testing & measuring
- Storage & Presentation
- Hammering
- Care and safety
-
Optional extensions
- Pulling hook
- Pulling hook extensions
- Thrust pieces
- Hydraulic spindle
- Spindle extension
- Hydraulic additional press
- Extensions for pullers
- Thread adapter
- Accessories for internal extractors
- Clamping clamp
- Impact crank
- Tie rods and extensions
- Hook with articulated joint
- Mechanical spindles
- Puller without hollow piston cylinder
- Hydraulic cylinders
- Hydraulic accessories
- Accessories for motor conductors
- Acessory assembly jig
- Soft-face mallet accessories
- Empty case
- Clamp carriage
- Inductive storage heaters
- Spare parts
- Extensions for pullers
-
Series 19-S
Extensions for pullers
The extensions for pullers are used with the pullers of the 18 series in trade, industry and workshops to increase the clamping depth of the puller.…
- Hydraulic spindle
-
Series K-8-HP
Hydraulic spindles
The hydraulic spindle with manual lever operation in the case is suitable for extracting particularly tight bearings, gears and pulleys with an…
- Hydraulic accessories
-
Series Y-AP-3XX
Accessories for hydraulic extraction
The accessories for "AXLE" Y-AP-75 are used in conjunction with it to quickly and easily press out and press in lorry kingpins in trade, industry and…
- Acessory assembly jig
-
Series W-6067/115
Clamping holder
The W-6067 series clamping holders are accessories for motor mounting brackets.
-
Series W-6066/151
Clamping angle
The clamping brackets of the W-6066 series are accessories for the Acessory assembly jigs. They are available individually and as a set.
- Pulling hook
-
Series 225-DC-01
Pulling hook
The set of replacement jaws is suitable for 3-arm pullers with self-centring puller hooks from the 225-SK series. The puller with short jaws is…
-
Series 225-0-S
Pulling hook
The set of pulling hooks is suitable for 3-arm pullers with self-centring pulling hooks from the 225 series. The hooks are specially shaped and…
-
Series Y205/Y505-E
Pulling hook
The Pulling hooks (single) are spare parts for hydraulic pullers. Pulling hooks are also suitable for pulling off particularly tight-fitting…
-
Series 70-A-K-S
Pulling hook
The series 70-A-K-S puller hook sets are suitable for series 70 ball bearing pullers and are used for the non-destructive removal of deep groove ball…
- Inductive storage heaters
-
Series T-AW
Inductive storage heaters
The inductive bearing heating devices in the T-AW series are used universally for heating bearings and other rotationally symmetrical workpieces in…
- Clamp carriage
-
Series 999
Clamp carriage
The 999 series clamp trolley is a sales trolley equipped with clamps for use, storage or sale in workshops, industry and trade. The large clamp…
- Puller without hollow piston cylinder
-
Series Y0-180
2- and 3-arm pullers (without hydraulic hollow piston cylinder)
The extractors of the Y-180 series are used together with separating knives and internal extractors for extracting particularly large and…
-
Series Y0-206
2- and 3-arm pullers (without hydraulic hollow piston cylinder)
The 3-arm pullers with swivelling pulling hooks from the Y-206 series are used for pulling particularly large and tight-fitting bearings, gears, discs…
-
Series Y0-208
2- and 3-arm pullers (without hydraulic hollow piston cylinder)
The 3-arm combination pullers with swivelling Pulling hooks from the Y-208 series are used to pull particularly large and tight bearings, gears, discs…
-
Series Y20-11
2- and 3-arm pullers (without hydraulic hollow piston cylinder)
The 3-arm pullers with adjustable clamping depth from the Y20-11 series are used to pull particularly large and tight-fitting bearings, gears, discs…
-
Series Y0-205
2- and 3-arm pullers (without hydraulic hollow piston cylinder)
The Y-205 series 2-arm pullers with swivelling Pulling hooks are used for pulling particularly large and tight bearings, gears, discs etc. in trade,…
- Empty case
-
Series K-A-TL
Empty case
The KUKKO transport and storage box offers sufficient storage space for tools, various accessories and other workshop requirements.
-
Series K-A-KT
Empty case
The highly impact-resistant polycarbonate lid on a solid base allows small parts to be stored safely. The cases can be customised with insert boxes…
- Tie rods and extensions
-
Series 818-P
Tie rods and extensions
The pull-pin extensions are used to extend the pull pins of a puller during disconnection.
- Pulling hook
-
Series 820-P
Pulling hook
The pair of pulling hooks is suitable for 2-arm pullers with a short hydraulic spindle from the 820 series. The robust pulling hooks guarantee…
-
Series 70-S
Pulling hook
The puller hook sets from the 70-S series are suitable for ball bearing pullers from the 70-0 series and are used for the non-destructive removal of…