Sort
Sort
Filter
- All products
- Pull off
- Cutting & loosening
- Pressing & Inserting
- Grip & Hold
- Screws & drive
- Signing & labelling
- Testing & measuring
- Storage & Presentation
- Hammering
- Care and safety
-
Optional extensions
- Pulling hook
- Pulling hook extensions
- Thrust pieces
- Hydraulic spindle
- Spindle extension
- Hydraulic additional press
- Extensions for pullers
- Thread adapter
- Accessories for internal extractors
- Clamping clamp
- Impact crank
- Tie rods and extensions
- Hook with articulated joint
- Mechanical spindles
- Puller without hollow piston cylinder
- Hydraulic cylinders
- Hydraulic accessories
- Accessories for motor conductors
- Acessory assembly jig
- Soft-face mallet accessories
- Empty case
- Clamp carriage
- Inductive storage heaters
- Spare parts
- Pulling hook
-
Series 0-P
Pulling hook
The pair of two standard pulling hooks is suitable for 2-arm universal pullers The robust pulling hooks guarantee particularly safe pulling of…
-
Series 0-S
Pulling hook
The set of three standard pulling hooks is suitable for 3-arm universal pullers. The robust pulling hooks guarantee particularly safe removal of…
-
Series 1-P
Pulling hook
The pair of two narrow pulling hooks (pair) is suitable for 2-arm universal pullers. The narrow Pulling hooks ensure that even narrow and inaccessible…
-
Series 1-S
Pulling hook
The set of three narrow pulling hooks (set) is suitable for 3-arm universal pullers. The narrow Pulling hooks ensure that even narrow and…
-
Series 2-P
Pulling hook
The pair of two quick-adjusting standard pulling hooks is suitable for 2-arm universal pullers. The robust pulling hooks guarantee particularly safe…
-
Series 2-S
Pulling hook
The set of three quick-adjusting standard pulling hooks is suitable for 3-arm universal pullers. The robust pulling hooks guarantee particularly safe…
-
Series 3-P
Pulling hook
The pair of two narrow, quick-adjusting pulling hooks is suitable for 2-arm universal pullers. The narrow Pulling hooks ensure that even narrow and…
-
Series 3-S
Pulling hook
The set of three narrow, quickly adjustable pulling hooks is suitable for 3-arm universal pullers. The narrow Pulling hooks ensure that even narrow…
-
Series 4-P
Pulling hook
The pair of two extremely narrow pulling hooks (pair) is suitable for 2-arm universal pullers. The trapezoidal contact surface of the claw ensures…
-
Series 4-S
Pulling hook
The set of three extremely narrow pulling hooks (set) is suitable for 3-arm universal pullers. The trapezoidal contact surface of the claw ensures…
-
Series 5-P
Pulling hook
The pair of two extremely narrow, quick-adjusting Pulling hooks (pair) is suitable for 2-arm universal pullers. The trapezoidal contact surfaces of…
-
Series 5-S
Pulling hook
The set of three extremely narrow, quickly adjustable pulling hooks (set) is suitable for 3-arm universal pullers. The trapezoidal contact surface of…
-
Series SP-P
Pulling hook
The pair of two height-adjustable pulling hooks is suitable for 2-arm pullers. The robust pulling hooks guarantee particularly safe removal of…
-
Series SP-S
Pulling hook
The set of three height-adjustable pulling hooks is suitable for 3-arm pullers. The robust pulling hooks guarantee particularly safe removal of…
- Pulling hook extensions
-
Series V-P
Pulling hook extensions
The pair of jaw extensions is used to extend the clamping depth. This allows components that are particularly deep on a shaft to be gripped. The…
-
Series V-S
Pulling hook extensions
The set of puller hook extensions is used to extend the clamping depth. This allows components that are particularly deep on a shaft to be gripped.…
- Accessories for internal extractors
-
Series 21-V
Extensions for internal extractors
The extensions for series 21 internal extractors are used for loosening and extracting deep-seated bearings, bearing outer rings and bushes in trade,…
-
Series G-22
Accessories for inside removal
The 3-component handle as an accessory for slide hammers from the 22 series provides better guidance during the extraction process when using slide…
-
Series 22-1-AS
Accessories for inside removal
The 22 series thread insert set for slide hammers or counter stays is used for extracting parts with centred threaded holes in trade, industry and…
- Thrust pieces
-
Series 600-17
Thrust pieces
The Thrust piece kit is used to support the pressure spindle with a hollow shaft. The kit contains a total of three Thrust pieces, which have…
- Hydraulic spindle
-
Series 800
Hydraulic spindles
The grease-hydraulic spindle of the 800 series is the motor of the puller and achieves an average pulling force of 20 tonnes. It can be used to…